SV 102+ to dwukanałowy dozymetr hałasu dedykowany do pomiarów na stanowiskach pracy zgodnie z normą ISO 9612 oraz ISO 11904-1. Przyrząd jest zgodny z wymogami na klasę drugą mierników poziomu dźwieku zgodnie z normą IEC 61672.
Przyrząd jest nową wersją dotychczasowego dozymetru SV 102, pierwszego i jak dotychczas jedynego na świecie dwukanałowego dozymetru hałasu. Wykonywanie jednoczesnego pomiaru po obu stronach głowy jest wymagane przez normę ISO 9612 w przypadku kierunkowych źródeł hałasu. Wiąże się to z tłumieniem wysokich częstotliwości przez głowę operatora. Typowe aplikacje tego typu pomiarów to pomiary hałasów od wystrzałów czy np. pomiary hałasu od maszyn umieszczonych z jednej strony operatora.
Unikalną cechą jaką oferuje SV 102+ jest możliwość wykonywania pomiarów w uchu, tzw. MIRE (Mircophone in Real Ear). Pomiar MIRE zgodny z normą ISO 11904-1 jest jedynym sposobem na określenie dawki hałasu od źródeł znajdujących się blisko ucha, takich jak słuchawki telefonów czy słuchawki pilota śmigłowców. Technologia MIRE wymaga analizy tercjowej mierzonego sygnału, która w SV 102+ jest dostępna jako opcja dodatkowa.
SV 102+ posiada wiele funkcji ułatwiających pomiar, takich jak nagrywanie komentarzy głosowych przed i po pomiarze w celu identyfikacji plików pomiarowych, zapis audio w trakcie pomiaru w celu identyfikacji zdarzeń akustycznych czy funkcję autokalibracji – upraszczającą kalibrację przed i po pomiarze do minimum – wystarczy nałożyć kalibrator na mikrofon aby dokonać automatycznej kalibracji.
Raportowanie zgodnie z normami ISO zapewnia oprogramowanie Supervisor, pozwalające na zapis szablonów raportów ułatwiając pracę użytkownika.
FEATURES
Dosimeter/SLM/Analyser | |
Standards | IEC 61252; ANSI S1.25-1991; Class 2: IEC 61672:2002, ISO 11904-1 |
Acoustic Dosimeter Mode | Lav/Leq, SPL, Lmax, Lmin, SEL, SEL8, PSEL, LEPd, Dose (%), TWA, E, E_8h, Peak, Run Time, Upper Limit Time (ULT), L(C-A), Projected Dose (D_8h) |
SLM Mode | Leq, Spl, SEL, LEP,d, Lden, Ltm3, Ltm5, statistics - Ln (L1- L99), LMax, LMin, LPeak Simultaneous measurement in three profiles with independent set of filters and detectors |
Weighting Filters | A, C and Z |
RMS Detector | Digital true RMS detector with Peak detection, resolution 0.1 dB Time constants: Slow, Fast, Impulse |
Microphone | SV 25D, Class 2, ceramic microphone, 1/2" housing with built-in preamplifier & integrated cable SV 25S, special microphone with dedicated probe for Microphone-In-Real-Ear technique (option) SV 25D and SV 25S have built-in TEDS functionality for the automatic calibration |
Measurement Range | 45 dBA RMS ÷ 141 dBA Peak (with SV 25D microphone) |
Frequency Range | 20 Hz ÷ 20 kHz, sampling rate 48 kHz |
Dynamic Range | 100 dB |
Data Logger1 | Time-history logging of Leq/Lmax/Lmin/Peak/Lav results to internal memory with time step down to 100 millisecond to microSD card |
Audio Recorder1 | Time-domain signal events recorder (option) |
Dual-channel Mode | Dual-channel measurement mode with second microphone SV 25D or SV 25S |
1/1 Octave1 | Dual-channel 1/1 octave real-time analysis and spectra logging, 10 filters with centre frequencies from 31.5 Hz to 16 kHz, Type 1: IEC 61260 (option) |
1/3 Octave1 | Dual-channel 1/3 octave real-time analysis and spectra logging, 31 filters with centre frequencies from 20 Hz to 20 kHz, Type 1, IEC 61260 (option) |
Basic Data | |
Input | 2 x LEMO 2-pin, Direct |
Display | Colour 160 x 128 pixels OLED type |
Memory | MicroSD card 8 GB (removable & upgradeable) |
Interfaces | USB 1.1 Client Extended I/O - AC output (1 V Peak) / Digital Output (Alarm trigger) / Digital Input (Input trigger) |
Power Supply | Two AA batteries (alkaline): operation time > 16 h (3.0 V / 1.6 Ah)2 Two rechargeable batteries (not included): operation time > 20h (2.4 V / 2.6 Ah)2 USB interface: 150 mA HUB |
Environmental Conditions | Temperature: from -10 oC to 50 oC Humidity: up to 90 % RH, non-condensed |
Dimensions | 95 x 83 x 33 mm (without microphones) |
Weight | 260 grams with batteries (without microphones) |
1function parallel to the acoustic dosimeter mode or meter mode
2depends on instrument operation mode
*Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam volutpat, felis ut aliquam pretium, sapien libero vestibulum ipsum, vel condimentum nisl lorem vel lacus. Cras mi dolor, pretium ac hendrerit ac, consequat et justo. Suspendisse placerat velit quis orci molestie elementum. Sed tristique vestibulum arcu id gravida. Nunc id enim velit. In urna odio, viverra vitae aliquet eu, tincidunt at arcu. Mauris in tempus nunc. Vivamus a sodales dolor, sed fringilla velit. Curabitur cursus, lacus id porttitor semper, leo lectus congue mauris, eget vulputate risus arcu non dolor. Nam tincidunt molestie est, nec lobortis neque rutrum id.
Vestibulum mollis egestas lacus nec dictum. Donec sagittis, lorem ac iaculis placerat, nisl lacus tristique felis, nec posuere eros purus id sem. Donec sit amet egestas tellus, non fermentum ligula. Quisque posuere nunc nec mi congue molestie. Nam tincidunt felis a faucibus varius. Aenean urna dolor, malesuada ac leo eu, consequat blandit risus. Praesent arcu lectus, ultrices a nibh sit amet, dictum tempor tellus. Aliquam tincidunt, arcu interdum tristique pharetra, odio dolor feugiat lorem, in pretium sem leo et sapien. Etiam tempus purus ante, nec consequat sapien convallis non. Vivamus quis leo justo.