SVAN 959
Sound and Vibration Analyser
PTB APPROVAL 21.21/09.03



 

 
SVAN 959 is the top of the range, Type 1,  single channel instrument for general acoustic and vibration measurements, environmental monitoring, occupational health and safety monitoring.
 
Instrument is intended for professional usage and it is provided with 1/1 and 1/3 octave analysis options in a standard version. Optionally SVAN 959 can be equipped in functionalities such as: FFT analysis, acoustic loudness measurements, tonality measurements, reverberation time measurements and user programmable second order band pass filters.
  
SVAN 959 is delivered with a prepolarised GRAS microphone of a sensitivity 50 mV/g for the sound measurements. With a suitable accelerometer (ICP/IEPE) instrument can also measure vibrations according to ISO 8041:2005 and ISO 10816-1 standards. All required weighting filters (e.g.: A, C, Wk, Wc, Wh) including the latest ISO 2631 & ISO 5349 standard are available with this instrument. RMQ detector enables direct measurement of the Vibration Dose Value (VDV). 
   

SVAN 959 TYP 1

Approval in Spain

and by PTB in Germany

  

During the measurement SVAN 959 uses three independent profiles. Filters and RMS detector time constants can be differently set in each profile. This solution allows to obtain measurement results such as Leq, LMax, LMin, LPeak, Spl or SEL RMS, PEAK, VDV, MTVV with different frequency and time weighing in the same time. This feature is extremely valuable when the comparison of measurements is required.

Moreover, instrument is able to perform advanced measurement techniques like MLS, TDS etc. thanks to built-in sophisticated signal generator (option).

SVAN 959 is designed for easy communication with computers using built-in ports USB client and USB host. In practice it means full remote control over the instrument from the PC.
Fast USB 1.1 interface (12 MHz) creates real time link for the PC "front-end" application of the SVAN 959 instrument. The cable for the communication with the PC is provided in standard. Instrument can be also remotely controlled by PC using the RS 232 or IrDA interfaces (options).

USB host exceeds memory limitation allowing the direct data storage on the USB memory stick. Optionally, SVAN 959 can record a raw audio data to a flash disk in WAV format, so the sources of noise can be played back and identified by listening (Time Domain Signal Recording). The audio events recording function is very useful in measurements requiring unattended monitoring.

Easy communication with the PC is supported by the free of charge software SvanPC+. This already advanced and user-friendly software can be optionally upgraded to provide remote communication with the SVAN 959 instrument by the GPRS wireless transmission or RS 232 interface using generally available serial port extender devices. This exceptional feature makes SVAN 959 the leading product for measurements in field (environmental monitoring).

SVAN 959 is powered from NiMH standard or rechargeable AA batteries. The powering of the instrument from the External DC power source or USB interface is also provided.
Robust and light weight design accomplishes the exceptional features of this new generation instrument.
 

FEATURES

  • Type 1 IEC 61672:2002 sound level measurements
  • General vibration measurements (acceleration, velocity and displacement)
    and optionally HVM meeting ISO 8041:2005 standard
  • Three parallel independent profiles
  • 1/1 and 1/3 octave real time analysis
  • FFT real time analysis - 1600 lines in up to 20.0 kHz band
  • Pure tone detection
  • Acoustic loudness measurements
  • RT 60 Reverberation Time measurements
  • Advanced Data Logger including spectra's logging on the USB Memory Stick
    provides almost unlimited logging capacity
  • Time domain signal recording
  • Advanced trigger and alarm functions
  • USB 1.1 Host & Client interface
    (real time PC "front end" application supported)
  • RS 232 and IrDA interfaces
  • Modbus protocol
  • Built-in signal generator
  • Integration time programmable up to 24 h
  • Power supply by four AA rechargeable NiMH or standard batteries
  • Hand held, light weight and robust case
  • Easy in use

SVAN 959 Technical specifications

SOUND LEVEL METER / ANALYSER
Standards Type 1: IEC 61672-1:2002
Meter mode SPL, Leq, SEL, Lden, Ltm3, Ltm5, Statistics - Ln (L1-L99), LMax, LMin, LPeak
Simultaneous measurement in three profiles with independent set of filters and detector time constants
Analyser

1/1 octave1 real time analysis, Type 1, IEC 61260
1/3 octave1 real time analysis, Type 1, IEC 61260
FFT1 real time analysis, 1600 lines, up to 20.0 kHz band (option)
Loudness_ based on ISO 532B standard and Zwicker model (option)
Pure tone detection based on FFT analysis (Tonality_ option)
Reverberation Time analysis in 1/3 octave bands (RT 60 option)
User programmable second order band pass filters_ (option)
and more...
Weighting filters A, C and Z
RMS Detector Digital True RMS detector with Peak detection, resolution 0.1 dB,
Time Constants: Slow, Fast, Impulse
Microphone GRAS 40AE, 50 mV/Pa, prepolarised 1/2" condenser microphone with SV 12L IEPE preamplifier

Measurement Range

20 dBA RMS ÷ 140 dBA Peak (with 5 dB margin from noise level)
Dynamic Range 110 dB
Internal Noise Level less than 15 dBA RMS
Frequency Range

Range 0.5 Hz ÷ 20 kHz; microphone dependent,
with GRAS 40AE microphone: 3.15 Hz ÷ 20 kHz
VIBRATION LEVEL METER / ANALYSER (Option)
Standards ISO 8041:2005 and ISO 10816-1
Meter mode RMS, VDV, MTVV or MAX, Peak, Peak-Peak
Simultaneous measurement in three profiles with independent set of filters and detector time constants
Analyser 1/1 octave1 real time analysis
1/3 octave1 real time analysis
FFT1 real time analysis: 1600 lines, up to 20.0 kHz band (option)
RPM1 rotation speed measurement parallel to the vibration measurement (option)
Advanced enveloping option dedicated for bearing diagnostics (option)
User programmable second order band pass filters1 (option)
and more...
Filters

HP1, HP3, HP10, Vel1, Vel3, Vel10, VelMF, Dil1, Dil3, Dil10, KB, Wk, Wc, Wd, Wj, Wm, Wb, Wg (ISO 2631), Wh (ISO 5349) (option)
RMS & RMQ Detectors Digital True RMS & RMQ detectors with Peak detection, resolution 0.1 dB,
Time Constants: from 100 ms to 10 s
Accelerometer (option) Dytran 3185D general purpose accelerometer with 100 mV/g sensitivity

Measurement Range

Accelerometer dependent, with Dytran 3185D accelerometer: 0.003 ms-2 RMS ÷ 500 ms-2 PEAK
Frequency Range

0.5 Hz ÷ 20 kHz; accelerometer dependent, with Dytran 3185D accelerometer: 2 Hz ÷ 10 kHz
BASIC DATA
Input IEPE type with TEDS or Direct (TNC connector)
Dynamic Range 110 dB
Frequency Range 0.5 Hz ÷ 20 kHz, sampling rate 48 kHz
Data logger1 Time History logging to internal memory or USB Memory Stick
Time domain signal recording on USB Memory Stick (option)
Signal Generator Sine, Sweep, White noise, Pink noise etc. (option)
Display LCD 128 x 64 pixels plus icons with backlighting
Memory 32 MB non-volatile flash type, external USB Memory Stick
Interfaces USB 1.1 Client, USB 1.1 Host, RS 232 (with SV 55 option), IrDA (option)
Extended I/O - AC output (1 V Peak) or Digital Input/Output (Trigger - Pulse)
Power supply
Four NiMH rechargeable batteries (option) operation time > 16 h (4.8V / 2.6 Ah)2
Four AA batteries (alkaline) operation time > 12 h (6.0V / 1.6 Ah)2
SA 17A external battery pack operation time > 24 h (option)2
External power supply 6 V/500 mA DC ÷ 15 V/ 250 mA DC
USB interface 500 mA HUB
Environmental Conditions
Temperature from -10oC to 50oC
Humidity up to 90 % RH, non-condensed
Dimensions 338 x 82 x 42 mm (with microphone and preamplifier)
Weight Approx. 0.6 kg with batteries
1each function parallel to the meter mode
2with USB 1.1 Host function not active and backlight off

SVAN 959 - 10 Reason Why to Choose

  1. A very powerful low noise, type 1 sound level meter meeting IEC 61672:2002 standard requirements along with analyser.

     
  2. SVAN 959 offers general vibration measurements (acceleration, velocity and displacement) and optionally Human Vibration Measurements meeting ISO 8041:2005 standard.

     
  3. Three profiles allow parallel measurements with independently defined filters and RMS detector time constants what in fact means that SVAN 959 is three meters in one instrument.

     
  4. Exceptional logging capability, twelve results logged simultaneously with logging step down to 10 milliseconds.

     
  5. USB host controller provides almost unlimited memory capacity with external USB flash memory ("Memory Stick").

     
  6. Exceptional feature - time domain signals recording on external USB flash memory with parallel real-time measurements.

     
  7. SVAN 959 instrument can be provided with 1/1&1/3 octave analysis, FFT analysis, Acoustic loudness measurements, RT 60 reverberating time measurements Tonality function, advanced Enveloping function dedicated for bearing diagnostic, User programmable second order band pass filters and RPM measurements.

     
  8. Each analysis function works parallel to the meter mode.

     
  9. The measurement data can be easy downloaded to any PC using USB or RS 232 interface and SvanPC+ software. IrDA (infrared interface) is also available as an option.

     
  10. The SVAN 959 instrument can be offered with the SV 211 monitoring station and the SA 201A outdoor microphone. Instrument is powered from four standard "AA" batteries or NiMH rechargeable batteries like also from the USB interface or External DC source.

SVAN 959 - Short Guide

Click below to download
 

SVAN 959  Short User Guide

SVAN 959 - Interactive Guide

Click here to watch
Audio Events Recording Function
Wave Files Recording Function
FFT Function: settings and displaying

SVAN 959 - User Manual

Click below to download

Contents

Chapter 1 Introduction

Chapter 2 Manual Control of the Instrument

Chapter 3 Setting the Instrument

Chapter 4 Functions of the Instrument - FUNCTION

Chapter 5 Measurement Parameters Setting - INPUT

Chapter 6 Data Available on the Display - DISPLAY

Chapter 7 Saving the Measurement Results - FILE

Chapter 8 Printing Reports - REPORT

Chapter 9 Setup Menu - SETUP

Appendixes

 

Appendix A Remote Control

Appendix B Data File Structures

Appendix C Technical Specification

Appendix D Definitions and Filter Characteristics
Appendix G Reverberation Time
Appendix H Reverberation Time (general information)
Appendix I MODBUS Communication
Appendix J GPRS Communication
Appendix K Wave Recording
CE Declaration of Conformity
   
SVAN 959 User Manual (all in one file)

SVAN 959 - Drivers / Software

Click to download File name
SvanPC++ software
USB drivers

 


SVAN 959 - Ordering Hints

Below you will find the informations about SVAN 959 instrument configuration and related parts available in SVANTEK offer.All parts and options not included in a basic version of SVAN959 set are subjects to be priced additionally.

With any questions about prices etc. please contact local representative or send an email to office@svantek.com.pl


 
The basic version of SVAN959 set consists of:
SVAN 959
Sound & vibration level meter with 1/1 & 1/3 octave analyser
SV 959_15 Time domain signal recording (to the USB Flash Disk: .srt or .wav format)
SV 40AE
GRAS prepolarised microphone cartridge ½” 50mV
SV 12L
Microphone preamplifier IEPE / ICP
SC 16
USB cable for communication with the PC
SC 59
Cable (2pin Lemo plug to 2 x BNC sockets) which provides easy access to I/O port
SA 22
Windscreen
SvanPC+
Base module software for data download, visualisation and easy export to other applications
 
Manufactory calibration certificate
 
Four AA alkaline batteries
 
Following software options to SVAN959 are available additionally:
SV 959_4
FFT analysis option for the SVAN 959
SV 959_5
RT60 option for the SVAN 959
SV 959_6
Tonality analysis option for the SVAN 959
SV 959_7
Loudness analysis option for the SVAN 959
SV 959_8
Rotation measurement option without Laser Tachometer (RPM)
SV 959_9
Human Vibration filters option
SV 959_11
Enveloping analysis option
SV 959_15
Time domain signal recording (to the USB Flash Disk: .srt or .wav format)
SV 959_16
User programmable second order band pass filters
SV 959_18
Acoustic Environmental Monitoring function
 
Related hardware accessories for sound measurements:
SV 30A
Acoustic calibrator 1000 Hz with two calibration levels 94 dB & 114 dB
SV 31A
Acoustic calibrator 1000 Hz with single calibration level 114 dB
SV 211B
Waterproof protection case with additional 33 Ah battery and indoor charger
SA 203
Outdoor protection kit designed to be mounted on a tripod (additional cable required)
SA 206
Mast with adjustable high from 1.5 meters to 4 meters with guilines
SA 21
Tripod 1.5 meter high
SC 26 Extension cable (TNC plug to TNC socket) provides connection of SV 12L (SA 203) to SVAN 959 – standard length 3/ 5/ 10  meters

 

 

Related hardware accessories for vibration measurements:
SV 3185D
Single axis general purpose accelerometer 100 mV/g (connection to the SVAN 959 requires an additional cable SC 27)
SC 27
Coil cable (TNC plug to TNC plug) providing connection of the SV 3185D to SVAN 959 by the TNC plug
SA 27/3185D
Mounting magnet for accelerometer SV 3185D
SV RPM_PROB
Laser tachometer with SC 69 cable (additional option SV959_8 required)
 
Communication:
SV 55
Cable with integrated electronic providing RS 232 interface for SVAN 959
SV 56
IrDA interface option
SV 203PC
GPRS modem for SVAN 959 instrument (requires SV 55 cable for direct connection to SVAN 959)
SvanPC+_RC
PC software for remote communication with instrument connected to GPRS modem over internet
 
Other accessories:
SA 43
Carrying case
SA 45
Waterproof carrying case
SA 46
Belt-bag for acoustic dose measurements when SV 25 microphone is used
SA 47
Carrying bag (fabric material)
SA 15
Power supply from mains socket
SA 17A
External battery pack
 

SVAN 959 Configuration and Parts.pdf