SVAN 953
Type 2, Sound Level Meter

SVAN 953 is all digital, Type 2 sound level meter along with analyser.

It is an excellent choice for general acoustic measurements, environmental noise monitoring, occupational health and safety monitoring where measurement with type 2 accuracy is sufficient.
Similarly to other 95x instruments, SVAN 953 uses three acoustic profiles for parallel measurements with independently defined filters and RMS detector time constants. Each profile provides significant number of results (like Leq, LMax, LMin, LPeak, Spl, SEL etc.). Acoustic dosimeter function is available with the SV 25_2 dedicated microphone.


Instrument is designed for easy communication with computers. Fast USB 1.1 interface (12 MHz) creates real time link for the PC “front-end” application of the SVAN 953 instrument. Easy communication with the PC is supported by the free of charge software SvanPC+. 
 

SVAN 953 ORDERING INFORMATION

Advanced time history logging for each profile provides complete information about measured signal in nonvolatile 16 MB internal memory. Optionally SVAN 953 can be equipped with the USB host, very handy port for USB memory stick. This solves the problem of the memory limitation for measurement results which now can be recorded directly to the USB memory stick. Moreover, the measurement results can be also downloaded to any PC using the RS 232 or IrDA interfaces (options).
Using computational power of its digital signal processor the SVAN 953 instrument can, simultaneously to the meter mode, perform real time 1/1 octave analysis including statistical calculations and FFT analysis.
Instrument is powered from four AA standard or rechargeable batteries (separate charger is required). The powering of the instrument from the External DC power source or USB interface is also provided.
Robust case and light weight design accomplish the exceptionality of this new generation instrument. 
 

FEATURES

  • Type 2 sound level measurements meeting IEC 61672:2002
  • Single measurement range in the Meter Mode
  • Three parallel independent profiles
  • Advanced Data Logger, up to 12 results logged simultaneously
  • Time History recording on USB Memory Stick providing
    almost unlimited logging capacity
  • 1/1 octave real time analysis
  • FFT real time analysis
  • Acoustic dose meter
  • Advanced trigger and alarm functions
  • USB 1.1 interface
    (real time PC “front end” application)
  • USB 1.1 Host, RS 232 and IrDA interfaces
  • Integration time programmable up to 24 h
  • Power supply by four AA rechargeable
    or standard battery
  • Easy in use
SVAN 953 Technichal specifications
SOUND LEVEL METER / ANALYSER
Standards Type 2: IEC 61672-1:2002
Meter mode SPL, Leq, SEL, Lden, Ltm3, Ltm5, Statistics - Ln (L1-L99), LMax, LMin, LPeak
Simultaneous measurement in three profiles with independent set of filters and detector time constants
Analyser

1/1 octave1  real time analysis, Type 1, IEC 61260 (option)
FFT1 real time analysis, 1920 lines, up to 22.4 kHz band (option)
Acoustic dosimeter1 meeting IEC 61252 with SV 25_2 microphone (option)
and more...
Weighting filters A, C and Z
RMS Detector Digital True RMS detector with Peak detection, resolution 0.1 dB,
Time Constants: Slow, Fast, Impulse
Microphone ACO 7052H, 20 mV/Pa, prepolarised 1/2" condenser microphone with SV 12 IEPE preamplifier

Measurement Range

Total Dynamic Range: 18 dBA RMS ÷ 141 dBA Peak
Linearity Range: 26 dBA RMS ÷ 141 dBA Peak
Dynamic Range 120 dB (in meter mode)
Data Logger1 Time History logging of RMS / Max / Min / Peak results to internal memory
or USB Memory Stick (USB Host option) with logging step down to 2 ms (option)
BASIC DATA
Input IEPE type (TNC connector)
Dynamic Range 120 dB in meter mode
100 dB in analyser mode
Frequency Range 10 Hz ÷ 20 kHz, sampling rate 48 kHz
Data logger1 Time History logging to internal memory (option)
or USB Memory Stick (option)
Time domain signal recording on USB Memory Stick (option)
Display LCD 128 x 64 pixels plus icons with backlighting
Memory 16 MB non-volatile flash type
external USB Memory Stick (option)
Interfaces USB 1.1 Client, USB 1.1 Host (option), RS 232 (with SV 55 option),
IrDA (option)
External I/O - AC output (1 V Peak) or Digital Input/Output (Trigger - Pulse)
Power supply
Four AA batteries (alkaline) operation time > 12 h
(6.0 V / 1.6 Ah)2
Four AA rechargeable batteries (not included) operation time > 16 h
(4.8 V / 2.6 Ah)2
SA 17A external battery pack operation time > 24 h (option)2
External power supply 6 V DC ÷ 15 V DC (1.5 W)
USB interface 500 mA HUB
Environmental Conditions
Temperature from -10oC to 50oC
Humidity up to 90 % RH, non-condensed
Dimensions 300 x 82 x 42 mm (with microphone and preamplifier)
Weight Approx. 0.6 kg with batteries
1 each function parallel to the meter mode
2 with USB 1.1 Host function not active and backlight off
SVAN 953 - 10 Reason Why to Choose
  1. A very powerful low cost, type 2 sound level meter meeting IEC 61672:2002 standard requirements.

     
  2. SVAN 953 instrument has single range in meter mode what is exceptional future in type 2 instrument.

     
  3. Three profiles allow parallel measurements with independently defined filters and RMS detector time constants what in fact means that SVAN 953 is three meters in one instrument.
     
  4. Exceptional logging capability, twelve results logged simultaneously with logging step down to 2 milliseconds.

     
  5. USB Host controller provides almost unlimited memory capacity with external USB flash memory ("Memory Stick").

     
  6. Acoustic dosimeter function with dedicated SV 25_2 dose microphone is available.

     
  7. SVAN 953 instrument can be provided with 1/1 octave analysis like also FFT analysis.

     
  8. Each analysis function works parallel to the meter mode.

     
  9. The measurement data can be easy downloaded to any PC using USB or RS 232 interface and SvanPC+ software. IrDA (infrared interface) is also available as an option.

     
  10. The SVAN 953 instrument can be offered with the SV 211 monitoring station and the SA 203 outdoor microphone kit. Instrument is powered from four standard "AA" batteries or NiMH rechargeable batteries like also from the USB interface or External DC source.

     
SVAN 953 - Short Guide
Click below to download
 

SVAN 953  Short User Guide
SVAN 953 - Interactive Guide
Coming soon
SVAN 953 - User Manual
Click below to download

Contents

Chapter 1 Introduction

Chapter 2 Manual Control of the Instrument

Chapter 3 Setting the Instrument

Chapter 4 Functions of the Instrument - FUNCTION

Chapter 5 Measurement Parameters Setting - INPUT

Chapter 6 Data Available on the Display - DISPLAY

Chapter 7 Saving the Measurement Results - FILE

Chapter 8 Printing Reports - REPORT

Chapter 9 Setup Menu - SETUP

Chapter 10 1/1 Octave Analyser

Appendixes

Appendix A Remote Control

Appendix B Data File Structures

Appendix C Technical Specification

Appendix D Definitions and Filter Characteristics
Appendix J GPRS Communication
   
SVAN 953 User Manual (all in one file)
 
SVAN 953 - Drivers / Software
Click here to download
DOWNLOAD NOW SvanPC+ software base module
ZIP file [ 813 KB] SvanPC v. 2.7.18 (5/12/2007) (both RS 232 & USB)
ZIP file [ 360 KB] USB drivers v. 1.3.6n (14/06/2007)
SVAN 953 - Send Inquiry
Coming soon
SVAN 953 - Ordering Hints

 

Below you will find the informations about SVAN 953 instrument configuration and related parts available in SVANTEK offer.
All parts and options not included in a basic version of SVAN 953 set or in the SVAN 953_2 version are subjects to be priced additionally.
With any questions about prices etc. please contact local representative or send an email to office@svantek.com.pl
 
 
The basic version of SVAN 953 set consists of:
 
SVAN 953
Type 2 Sound Level Meter
SV 7052
Prepolarised condenser microphone cartridge 1/2" / 22 mV
SV 12
Microphone preamplifier IEPE / ICP
SC 16
USB cable for communication with the PC
SvanPC+
Base module software for data download, visualisation and easy export to other applications
Certificate
Manufactory calibration certificate
Batteries
Four AA alkaline batteries
 
SVAN 953_2 version, with Logger and USB Host consists of:
 
SVAN 953_2
Type 2 Sound Level Meter with USB Host (cannot be added afterwards)
SV 953_14
Time History Data Logger option for the SVAN 953
SV 7052
Prepolarised condenser microphone cartridge 1/2" / 22 mV
SV 12
Microphone preamplifier IEPE / ICP
SC 16
USB cable for communication with the PC
SvanPC+
Base module software for data download, visualisation and easy export to other applications
Certificate
Manufactory calibration certificate
Batteries
Four AA alkaline batteries
 
SVAN 953 analysis options :
 
SV 953_1
1/1 octave analysis option for the SVAN 953
SV 953_4
FFT analysis option for the SVAN 953
SV 953_10
Dosimeter option for the SVAN 953 (without SV 25_2 microphone)
SV 953_14
Time History Data Logger option for the SVAN 953
 
Accessories for sound measurements:
 
SV 30A_1
Acoustic calibrator 1000 kHz with two calibration levels 94 dB & 114 dB
SV 31A_1
Acoustic calibrator 1000 kHz with single calibration level 114 dB
SV 25_2
Microphone for acoustic dose measurements, ½” microphone size casing with integrated preamplifier and cable, type 2
SA 06
Microphone preamplifier holder mounted on the tripod (preamplifier on extension cable SC 26)
SA 21
Tripod 1.5 meter height
SC 26
Extension cable (TNC plug to TNC socket), provides connection of SV 12 to SVAN 953 – 3 meters long
SC 26/5
Extension cable (TNC plug to TNC socket), provides connection of SV 12 to SVAN 953 – 5 meters long
SC 26/10
Extension cable (TNC plug to TNC socket), provides connection of SV 12 to SVAN 953 – 10 meters long
 
Communication:
 
SV 55
Cable with integrated electronic providing RS 232 interface for SVAN 953
SV 56
IrDA interface option
 
Other accessories:
 
SA 18
Carrying bag for SVAN 95x and accessories (leather)
SA 43
Carrying case (recommended)
SA 45
Waterproof carrying case
SA 46
Belt-bag for acoustic dose measurements when SV 25_2 microphone is used
SA 47
Carrying bag (fabric material)
SA 22
Windscreen
SA 15
Power supply from mains socket
SA 17A
External battery pack
 

 

SVAN 953 ORDERING INFORMATION