Dozymetr akustyczny SV104 służy do ciągłego pomiaru poziomu hałasu na stanowiskach pracy. Funkcja analizy w pasmach oktawowych umożliwia określenie widma hałasu i dobór odpowiednich ochronników słuchu. Funkcja nagrywania sekwencji audio pozwala na rozpoznawanie zakłóceń. SV104 mocowany jest za pomocą klipsów do ubrania pracownika w pobliżu ucha. Dozymetr ma wbudowany mikrofon 1/2” wykonany w technologii MEMS. Ta nowatorska konstrukcja nie wymaga zastosowania kabla mikrofonowego i pozwala na łatwą kalibrację przyrządu powszechnie stosowanymi kalibratorami akustycznymi.
SV 104 ma wbudowaną pamięć 8GB na karcie mikroSD. Są w niej zapisywane wyniki pomiarów i pliki audio. Kolorowy wyświetlacz OLED umożliwia odczyt wyników w formie tekstowej i graficznej w każdych warunkach oświetlenia. Dozymetr zasilany jest z wbudowanych akumulatorów. Interfejs USB umożliwia podłączenie dozymetru do komputera. Specjalizowane oprogramowanie Supervisor umożliwia zaprogramowanie przyrządu oraz odczyt i analizę wyników.
Nowatorska konstrukcja, funkcje dodatkowe, możliwość współpracy z komputerem oraz niewielka, lekka i wytrzymała obudowa czynią z przyrządu SV 104 zupełnie nową jakość w dozymetrycznych pomiarach hałasu.
Standards | IEC 61252; ANSI S1.25-1991; Class 2: IEC 61672:2002 |
Weighting filters | A, C and Z |
Time constants | Slow, Fast, Impulse |
Exchange rates | 2, 3, 4, 5, 6 |
Measurement results | Lavg/Leq, SPL, Max, Min, SEL, SEL8, PSEL, LEPd, Dose (%), TWA, E, E_8h, Peak, Run Time, Upper Limit, Time (ULT), L(C-A), Projected Dose (D_8h) |
Measurement profiles | 3 |
Microphone | Class 2 microphone, 1/2" housing with built-in TEDS functionality for the automatic calibration |
Measurement range | 55 dBA RMS ÷ 140.1 dBA Peak |
Frequency range | 30 Hz ÷ 8 kHz |
Dynamic range | 95 dB |
Data logging | Summary results for the measurement time Time-history logging of Leq/Max/Min/Peak with 1s logger step |
Voice comments | Audio records on demand, created before or after measurement, added to measurement file |
Audio recording | Audio events recording, trigger and continuous mode, 12 or 24 kHz sampling rate, wav format (option) |
1/1 octave | Real-time analysis in octave band filters, Class 1, IEC 61260 9 filters with centre frequencies from 31.5 Hz to 8 kHz (option) |
| |
Display | 128 x 64 pixels OLED |
Memory | 8 GB |
Interfaces | USB 2.0 client |
Keyboard | 3 push buttons |
Power supply | Ni-MH rechargeable cells: operation time > 40 hours1 |
USB interfac:e 500 mA HUB | |
Environmental conditions | Temperature from -10 oC to 50 oC |
Humidity up to 95 % RH, non-condensed | |
Dimensions | 88 x 49.5 x 19.2 mm |
Weight | 100 grams with batteries |
1depends on instrument operation mode
*Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.
Workers should wear hearing protectors if the noise or sound level at the
workplace exceeds 85 decibels. The selection of hearing protectors depends
on a noise level in the working environment. Therefore the selection of
suitable hearing protector should be based on noise measurement.
Each hearing protector has attenuation characteristics expressed in units of
three methods:
SNR Single Number Rating,
HML High, Medium and Low frequency method, using
A-weighted and C-weighted sound measurements in
the calculation
Octaves the most accurate method requiring measurement
in 1/1 octave bands
The Supervisor supports all three methods allowing users to build up the
hearing protectors data base. The calculation is done automatically with
selection of data files containing noise results required by selected method.